hide cable from view

The IMP-A is designed to warm the roof edge in order to prevent ice dams. The panel can contain either the Delta-Therm CO Series or IN Series self regulating roof deicing cables.

angled ice melt panels

Each IMP-A is 4' (1m) long X 8" (20cm) wide with angled cable channel to direct your melt water into the gutter.

.

hide cable from view

The IMP-F is designed to warm the roof area 6" past the overhang and the inside of valleys. The panel can contain either the Delta-Therm CO Series or IN Series self regulating roof deicing cables.

flat ice melt panels

Each IMP-F is 4' (1m) long X 8" (20cm) wide with flat cable channel.

1. Install the panels (using screws) .25" (.64cm) apart to allow for the natural expansion and contraction of the roof.
2. Install one or two rows of panels to cover the roof area 6" (15cm) past the roof overhang.
3. Install the flat panels up and down the valleys.
4. Place either CO or IN Series deicing cables inside of the channels and snap the covers on.
5. Install any deicing cables inside of the gutters and downspouts to complete your heated drain path.