The DT-AS-50 roof clip can be adhered between two asphalt shingles using the SB-190 adhesive. The adhesive will flow through the grating on the clip and anchor it to the topside of the lower shingle and bottomside of the upper shingle.
These aluminum clips can be installed on standing seam metal roofs using the VHB pads.
You can use the downspout to prevent damage to the deicing cable as it enters a downspout and to support the cable once inside of the downspout.
Use one downspout hanger for each deicing cable entering or exiting the downspout.
You can use one 10 oz. tube of SB-190 to adhere 50-75 of the DT-AS-50 clips to asphalt or metal materials. You can install SB-190 at a minimum application temperature of 50°F (10°C). Do not use SB-190 on copper or rubber membrane.
You can use 3M VHB 4951 pads high performance adhesives to adhere your RM-25-AL clips to standing seam metal roofs. You can install VHB at a minimum application temperature of 32°F (0°C). Do not use the VHB pads with the DT-AS-50 clips.
Literature
Compare Products
Case Studies